The hand puller is a hand tool commonly used in hoisting, stretching and other work. Its installation method is usually divided into the following steps:
Determine the installation location: According to the needs of the work, choose a suitable installation location and ensure that the installation location can withstand the maximum working load of the hand puller.
Fixing the base: Fix the base of the hand puller at the installation position. It can be fixed by bolts, rivets or welding. The fixing method needs to be selected according to the specific situation.
Install the handle: insert the handle of the hand puller into the socket of the base, and fix it with screws or pins to ensure that the handle will not fall off.
Connecting objects: Use the hook or ring of the hand puller to connect objects as needed, and lock the hook or ring firmly to the object.
Adjust the working distance: According to the needs of the work, adjust the working distance of the hand puller to ensure that the hand puller can complete the work tasks smoothly.
Perform a trial pull: Before using the hand puller, it is necessary to perform a test pull to check whether the installation of the hand puller is firm and whether it meets the work requirements to ensure safe use.
It should be noted that when installing and using the hand puller, it should be operated in strict accordance with the instruction manual and relevant standards to ensure safety.
There is a difference between hand puller and thread clamp
A hand puller and a thread grip are two different tools, and they function and are used differently.
Hand pullers are usually used to adjust and maintain the tension of rope materials such as wire ropes, ropes, net ropes, etc., so as to ensure their safety and stability during use. The hand puller usually uses some mechanical principles to adjust the tension of the rope by rotating a screw or a gear or other mechanism. Hand pullers are widely used in hoisting, transportation, ships, construction and other fields.
A wire clamp is a tool for fixing ropes, usually used to fix rope materials such as steel wire ropes, ropes, and net ropes to prevent them from sliding or falling off during use. Thread clamps usually use principles such as jaws and torsion to clamp the rope so that it is fastened to the desired position. Thread clamps are usually used in mountaineering, suspension, fixing and other fields.
So, while both hand pullers and grips can be used to secure rope, their main purpose and how they are used differ. It is necessary to select the appropriate tool according to the specific situation.
How to use gear hand puller?
The gear hand puller is a manual tool, usually used to pull out objects that need to be separated, such as machinery equipment, vehicles, engineering components, etc. When using it, you need to follow the steps below:
Determine the working position: Determine the installation position of the gear hand puller according to the needs of the work, and ensure that the ground where it is located is stable and firm.
Fix the chain: put the chain on the object to be separated, and fix it with a buckle, etc.
Fixing the hand puller: Fix the gear hand puller at the installation position, and you can use bolts, rivets and other fixing methods.
Select the gear position: According to the needs, select the appropriate gear position, usually, the larger the gear position, the greater the pulling force.
Pulling the handle: Rotate the handle, through the lifting movement of the gear, the traction of the chain is realized, so that the object generates an outward pulling force.
Adjust the gear position: If the pulling force is insufficient, you can choose a larger gear position, or add auxiliary tools, such as expanders, etc.
Complete pulling out: When the object is pulled out, stop the operation of the hand puller in time and remove the chain, etc.
It should be noted that when using the gear hand puller, you should strictly abide by the instruction manual and related standard operations to ensure safety. At the same time, the appropriate gear position and pulling force should be selected according to the needs to avoid overloading.